Avaya S8500 Series - Page 124

Job Aid: Replacing the SAMP on the Avaya S8500 Series server
124 Job Aids for Field Replacements (FRUs) for the Avaya S8500 Server
Figure 34: CAT5 cables connected to a port on the rear of the Avaya S8500B server
The SAMP also communicates with the host in-band through an onboard, industry-standard
Ethernet controller on the host’s PCI bus with an internal link to the SAMP as shown in
Figure 35: S8500B and SAMP connections and network interfaces
on page 125.
Figure notes:
1. Eth0 — to customer’s network if
nondedicated control network
(straight-through CAT5 cable)
2. Eth1 — to services laptop
(cross-connect CAT5 cable)
3. Eth2 — to port network if only one port
network (cross-connect CAT5 cable) or to
customer’s network if dedicated control
network (straight-through CAT5 cable)
4. Eth3 — not used
2
1
2
h3msbl5a KLC 093004
1
4
2
3
1