Ethernet interface mapping
03-300529 Issue 4 January 2008 159
Testing connectivity to customer’s network
To test network connections:
1. At the Web interface select Diagnostics > Ping.
The Ping screen displays (Figure 49: Ping screen
on page 159).
Figure 49: Ping screen
2. In the Host Name or IP address field, type in the host name or IP address of a computer
on the network.
3. Click Execute Ping.
4. Verify that the ping was successful, indicating that the server is connected to the customer’s
network.
5. If DNS is administered, type in the host name of a computer on the network.
6. Click Execute Ping.
7. Verify that the ping was successful, indicating that DNS is working.
To Next Page
Loading...
