Job Aid: Replacing the Avaya S8500/B/C server
24 Job Aids for Field Replacements (FRUs) for the Avaya S8500 Server
3. Slide the server cover back from the front panel until the cover’s tabs are released from the
top slot of the front panel.
4. Lift the cover straight up and remove it from the server.
Figure 1: Removing and replacing the cover on the S8500 server
Reusing the S8500 server’s hard drive
If the hard drive in the failed S8500 server is still good, then you want to reuse it in the
replacement server. Use the following process to swap the hard drives:
l Removing the hard drive from the failed S8500 server on page 25
l Removing the hard drive from the replacement S8500 server on page 26
l Installing the original hard drive in the replacement S8500 server on page 27
Figure notes:
1. Captive screws on server
h3mscaps LAO 070103
disc
1
To Next Page
Loading...
