Avaya S8500 Series - Checking LED Activity on the Dual Network Interface Card

Job Aid: Replacing the Avaya S8500 dual network interface
152 Job Aids for Field Replacements (FRUs) for the Avaya S8500 Server
Checking LED activity on the dual network interface card
When the S8500/B/C server is back in service:
1. Check the LEDs on each port of the dual NIC for network activity:
l S8500C: see Figure 46: S8500C rear panel on page 152.
l S8500B: see Figure 47: S8500B rear panel LEDs on page 153.
l S8500: see Figure 48: S8500 rear panel dual NIC LEDs on page 153.
Figure 46: S8500C rear panel
2. For Ethernet port 0, 1, 3, or 4 if the:
l LED is off: there is a 10 BASE-T active link.
l LED is green: there is a 100 BASE-T active link.
l LED is orange: there is a 1000 BASE-T active link.
Figure notes:
1. Power cord connector
2. SAMP power
3. USB connection (to USB modem)
4. Ethernet (not used)
5. SAMP services port
6. SAMP card
7. Dual NIC
8. Ethernet 4
9. Ethernet 3
10. Mouse connector
11. USB port
12. USB port
13. Ethernet 1
14. Ethernet 2
15. Video connector
16. Serial connector
17. Keyboard connector
h2msb8cc LAO 031706
2
1
Slot 1
Slot 2
7
1
2
3
4
5
6
8
9
10
11
12
13
14 16
1715