Job Aid: Replacing the Avaya S8500 dual network interface
140 Job Aids for Field Replacements (FRUs) for the Avaya S8500 Server
Check Ethernet interface settings
Before replacing the dual network interface, write down the Ethernet interface settings:
1. Go to Server Configuration > Configure Server Web page.
2. Click Continue through the review notices until you get to the Configure Server page with
"Specify how you want to use this wizard" at the top.
3. Select Configure Individual Services and click Continue.
The wizard displays a new left-side navigation panel.
4. Select Set Identities.
The Set Server Identities page displays.
5. Write down the Ethernet interface settings. You will use them again at Configuring the
NIC on page 154.
To Next Page
Loading...
