Replacing the S8500C server
03-300529 Issue 4 January 2008 61
Figure 12: Cover release button on the S8500C server
3. Use a screwdriver to slide the server cover back from the front panel until the cover’s tabs
are released from the top slot of the front panel.
4. Lift the cover straight up and set it aside.
Reusing the hard drive (S8500C)
If the hard drive in the failed S8500C server is still good, then re-use it in the replacement
server.
l Removing the hard drive from the failed S8500C server on page 62
l Removing the hard drive from the replacement S8500C server on page 63
l Installing the original hard drive in the replacement S8500C server on page 63
Figure notes:
1. Cover release button 2. Lift cover straight up.
C
D
-R
W
DVD
1
h3msc85c LAO 032306
2
To Next Page
Loading...
