Job Aid: Replacing the Avaya S8500/B/C server
62 Job Aids for Field Replacements (FRUs) for the Avaya S8500 Server
!
CAUTION:
CAUTION: Wear an anti-static wrist ground strap whenever handling components such as
the hard drive of an Avaya S8500C server. Connect the strap to an approved
ground, such as an unpainted metal surface. Also, place the hard drive on an
anti-static mat that is similarly grounded. Do not place the new or the old drive on
a bare surface.
Removing the hard drive from the failed S8500C server
To remove the hard drive from the S8500C server:
1. Reach inside the hard drive bay on the front panel of the S8500C server and grasp the two
"D" rings of the dual-loop carrier.
2. Pull the two loops toward each other to release the latch.
3. Pull the hard drive straight out of its bay by the loops (see Figure 13
).
Figure 13: Removing/replacing the hard drive (S8500C)
C
D
-R
W
DVD
h3msd85c LAO 032406
2
1
3
To Next Page
Loading...
