Replacing the S8500B server
03-300529 Issue 4 January 2008 45
Reusing the hard drive (S8500B)
If the hard drive in the failed S8500B server is still good, then you want to reuse it in the
replacement server. Use the following process to switch the hard drives.
l Removing the hard drive from the failed S8500B server on page 46
l Removing the hard drive from the replacement S8500B server on page 46
l Installing the original hard drive in the replacement S8500B server on page 47
!
CAUTION:
CAUTION: Wear an anti-static wrist ground strap whenever handling components such as
the hard drive of an Avaya S8500B server. Connect the strap to an approved
ground, such as an unpainted metal surface. Also, place the hard drive on an
anti-static mat that is similarly grounded. Do not place the new or the old drive on
a bare surface.
To Next Page
Loading...
