Job Aid: Replacing the Avaya S8500/B/C server
46 Job Aids for Field Replacements (FRUs) for the Avaya S8500 Server
Removing the hard drive from the failed S8500B server
To remove the hard drive from the S8500B server:
1. Press the release tabs on the bezel and pull the bezel away from the server (see
Figure 8: Removing/installing the hard drive (S8500B)
on page 46).
Figure 8: Removing/installing the hard drive (S8500B)
2. Pull the hard drive from the server.
3. To remove the hard drive from the drive tray, unscrew the four screws and remove the hard
drive.
Removing the hard drive from the replacement S8500B server
To remove the hard drive from the S8500B server.
1. Remove the cover from the replacement server. See Removing the cover of the S8500B
server on page 44.
2. Remove the hard drive from the replacement server. See Removing the hard drive from the
failed S8500B server on page 46 for a similar procedure.
disc
indsbhdv KLC 101404
To Next Page
Loading...
