03-300529 Issue 4 January 2008 173
Figure 54: Backing up the ASM configuration
9. After verifying that the current configuration summary settings are correct, click Close.
10. Now you can see the Backup ASM Configuration window (Figure 54
).
11. In the Backup ASM Configuration section click Backup.
12. Enter a name for the backup fileset and choose a location to write the backup files.
13. Click on one:
l For Windows Internet Explorer: Select Save this file to disk and then OK.
l For Netscape Navigator: Select Save File.
Backing up the server
Before replacing the RSA card, the server is powered down and all power connection removed.
As a security measure, backup the server before powering it down.
1. Connect the laptop to the port labeled 2 (Eth 1) on the back of the server using the
crossover cable.
2. Open a browser window on the laptop.
3. In the Address field of the browser, type in the URL for the server and press Enter.
A welcome window opens (Figure 55: Sever Welcome window
on page 174).
To Next Page
Loading...
