Replacing the S8500C server
03-300529 Issue 4 January 2008 67
Figure 15: Inserting the network interface card in the S8500C server
!
CAUTION:
CAUTION: Be sure that the NIC is completely and correctly seated in the PCI-2 expansion
slot of the Avaya S8500C server. Incomplete insertion might cause damage to
the system board or the dual NIC.
2. Replace the PCI-BUS carriage by pressing the assembly into the slot.
Replacing the cover on the replacement S8500C server
To replace the cover on the S8500C server:
1. Slide the server cover until the cover’s tabs are seated in the top slot on the front panel and
the release button latches securely (see Figure 12: Cover release button on the S8500C
server on page 61).
2
1
Slot 1
Slot 2
2
3
h3msn85c LAO 032306
1
To Next Page
Loading...
