Replacing the SAMP on the Avaya S8500C server
03-300529 Issue 4 January 2008 105
Figure 23: Download Files page
4. Select the "File(s) to download from the machine I’m using to connect to the server" button.
5. Use the Browse button to navigate to the firmware file on your laptop.
6. Press the Download button.
7. From the server’s command line type sampupdate and press Enter.
8. At the prompt to commit the software and print the software version, respond with Yes.
9. From the server’s command line type convertSampIP (case-sensitive) and press Enter.
Note:
Note: Detailed information about configuring the SAMP card is in the Avaya Server
Availability Management Processor User Guide (03-300322).
S8500C server connections
This section explains the connections for
l S8500C front panel connections
l S8500C rear panel connections
l S8500C SAMP connections
l S8500C network interface card connections
l S8500C modem connections
To Next Page
Loading...
