Avaya S8500 Series - Job Aid: Replacing the Avaya S8500 Dual Network Interface

03-300529 Issue 4 January 2008 139
Job Aid: Replacing the Avaya S8500 dual network
interface
!
Important:
Important: Always check the Avaya Support Website for Product Support Notices at
http://support.avaya.com
and select Product Support Notices (All Avaya
products) in the MOST POPULAR PRODUCTS IN SUPPORT section.
This document describes the steps required to replace an existing dual network interface card:
l S8500 and S8500B servers use Material ID 700284623
l S8500C servers use Material ID 700406725
The components of this procedure include:
l Check Ethernet interface settings
l Backing up the server
l Powering down the server
l Removing the cover of the server
l Removing the fan unit (S8500 only)
l Removing the old network interface card
l Installing the new network interface card
l Replacing the fan unit (S8500 only)
l Replacing the cover and cabling
l Powering up the server
l Checking LED activity on the dual network interface card
l Configuring the NIC
!
CAUTION:
CAUTION: Wear an antistatic wrist ground strap whenever handling the server or its
components. Connect the strap to an approved ground, such as an unpainted
metal surface.