Backing up the server
03-300529 Issue 4 January 2008 141
Backing up the server
Note:
Note: When replacing the dual NIC in an S8500/B/C server functioning as the Secure
Services Gateway (SSG) for a Secure Access and Control (SAC) deployment,
back up the SSG configuration. For information on how to backup the SSG
configuration, see Secure Services Gateway (SSG) Maintenance Guide,
9-300174. Backing up the server is not applicable for the SSG.
Backup the S8500/B/C server before you power it down. To backup the server complete the
following steps:
1. Connect the services laptop to the port labeled 2 (Eth 1) on the back of the server using the
crossover cable.
2. Open a browser window on the laptop.
3. In the address field of the browser, type in the URL for the server and press Enter.
A welcome window displays.
4. Click Continue.
5. Accept the Avaya certificate by clicking Yes.
The logon window displays.
6. Type craft in the Logon ID field and the password (obtained from ART) in the Password
field and click Logon.
7. Suppress alarm origination by clicking Yes.
8. Click Launch Maintenance Web Interface.
9. Select Data Backup/Restore > Backup Now from the navigation pane.
10. Select Server and System Files, Security Files, Avaya Call Processing (ACP
Translations under the Data Sets heading.
11. Select one of the following backup methods:
l FTP
l Local PC card
12. If you want to encrypt the backup, select the Encrypt backup using pass phrase check
box and type a pass phrase.
13. Click Start Backup.
To Next Page
Loading...
