Avaya S8500 Series - Page 26

Job Aid: Replacing the Avaya S8500/B/C server
26 Job Aids for Field Replacements (FRUs) for the Avaya S8500 Server
Figure 2: Removing and replacing the drive cage (S8500)
Removing the hard drive from the replacement S8500 server
To remove the hard drive from the replacement S8500 server.
1. Remove the cover from the replacement server. See Removing the cover of the S8500
server on page 23.
2. Remove the hard drive from the replacement server. See Removing the hard drive from the
failed S8500 server on page 25.
Figure notes:
1. Drive bay housing drive cage
2. Ribbon cable attached to hard drive
3. Power cable connected to the CD-ROM
drive
4. Captive screw holding drive cage
5. Tabs
6. Screws holding hard drive in drive cage
7. Hard drive
8. Drive cage
h3msdrv3 KLC 020204
1
2
3
5
6
6
disc
8
7
4
6