Job Aid: Replacing the Avaya S8500/B/C server
76 Job Aids for Field Replacements (FRUs) for the Avaya S8500 Server
5. When you click through all the pages, click Continue on the Update System screen. The
Update System screen displays each configuration task as it completes.
When done, the screen displays “All configuration information was entered.”
6. Click Close Window to close the Configure Server wizard.
7. If this server is a LSP or an ESS, issue these commands from the server command line:
a. stop -af or stop -caf to stop the LSP/ESS
b. start -a or start -ca to start the LSP/ESS
To Next Page
Loading...
