Expanded Procedures
03-300529 Issue 4 January 2008 97
3. Click View.
4. Select the correct file (the most recent is at the top) and click Restore.
5. Click Status to view the Restore status.
When the restoration is complete, the message Restore is finished displays.
6. At the command line type sudo ramdisk -v -f enabled and press Enter.
The system does not display any information to the screen if there are no errors.
7. At the command line type ramdisk -v -s and press Enter.
Confirm that the setting in the ecs.conf file is the desired state after the next reboot.
8. Reboot the server using the Maintenance Web Interface Shutdown Server option.
To Next Page
Loading...
