Azbil DCP31 - 4 - 9 Connecting auxiliary outputs (outputs 2, 3)

Optionalauxiliaryoutputscanbeaddedon.
WARNING
Before removing, mounting, or wiring the DCP31, be sure to turn off the power to
the DCP31 and all connected devices.
Failure to do so might cause electric shock.

0D, 5G, 6D auxiliary outputs
Handling Precautions
• 4 to 20mAdc and 0 to 20mAdc can be selected in setup data
C 9 0
.
• Use shielded cable only.

2G, 3D, 5K auxiliary outputs
Auxiliaryoutput1isnotprovidedfor2G,3Dand5Koutputs.
Handling Precautions
• 4 to 20mAdc and 0 to 20mAdc can be selected in setup data
C 9 0
.
• Use shielded cable only.
14
15
16
17
18
19
Receiver
Receiver
Auxiliary output 1
(output 2)
4 to 20/0 to 20 mAdc
Resistive load 600 Ω max.
Auxiliary output 2
(output 3)
4 to 20/0 to 20 mAdc
Resistive load 600 Ω max.
17
18
19
Receiver
Auxiliary output 2
(output 3)
4 to 20/0 to 20 mAdc
Resistive load 600 Ω max.
4-12
Chapter 4. WIRING
4 - 9 Connecting auxiliary outputs (outputs 2, 3)