Azbil DCP31 - 4 - 3 Terminal Connections

UsecrimpedterminalsthatfitontoM3.5screws.
Handling Precautions
• When installing the DCP31 in locations subject to vibration or
impact, be sure to use round crimped terminals to prevent the
lead from coming loose from the terminal.
• When wiring with crimped terminals, take care to prevent con-
tact with adjacent terminals.
• The recommended tightening torque for the terminal screws is
0.78to0.98N•m.
7.4
7.3 max.
6.6 max.
3.7dia.
Unit: mm
4-4
Chapter 4. WIRING
4 - 3 Terminal Connections