Azbil DCP31 - 2 - 2 Console

Theconsolecompriseskeysforoperatingthecontroller,displaysandLEDs.

Basic display state
The“basicdisplaystate”isthestateinwhichthecontrolleroperat-
ingstateisdisplayedontheconsole.
WhenthepoweristurnedON,thecontrollerisinthisstate.
Keyoperationchangesthecontrollerfromthebasicdisplaystateto
oneoftheparametersetup,programsetup,programcopyorgeneral
resetstates.Keyoperationalsoreturnsthecontrollertothebasic
displaystate.

Display
• ProgramNo.display
 Inthebasicdisplaystate,thisdisplayindicatesthecurrently
selectedprogramNo.
Intheprogramsetupstate,thisdisplayindicatestheprogramNo.
currentlybeingsetup.
 Duringconstant-valueoperation,thisdisplaygoesoutinthebasic
displaystate.
 Whenanalarmoccursinthebasicdisplaystate,alarmcode“AL”
isdisplayed.
Parameter setups
Program setups
Program copy
General reset
Power ON
Basic display states
Lowerdisplay
Program No. display
Mode indicator LED lamps
Event LEDs
Segment No. display
Basic indicator LED lamps
Upper display
Lower display
Low battery voltage LED (BAT)
Control/output state LED
Prole display
ModeindicatorLEDs
2-2
Chapter 2. NAMES & FUNCTIONS OF PARTS
2 - 2 Console