Azbil DCP31 - Keys

2-6
Chapter 2. NAMES & FUNCTIONS OF PARTS
Category Function Key operation
Parameter setup Starts parameter setup. So the controller enters
selection of setup group (major item).
(in basic display state)
FUNC
+
PARA
To change the setup group (major item)
PARA
To x the setup group
ENT
To moves between individual items (minor items)
To start changing individual item setting values
(while setting value is blinking)
ENT
To end changing individual item setting values
(while setting value is blinking)
To change individual item setting values
(while setting value is blinking)
To cancel changing individual item setting values
(in basic display state)
PARA
To selects setup group
To end parameter setup
DISP
PARA
key
Assignment item
setup
To start changing assignment item setting values
(in basic display state)
PARA
To move to next item by assignment item, and start
changing setting values
To change assignment item setting values
(while setting value is blinking)
To end changing assignment item setting values
(while setting value is blinking)
ENT
To start changing assignment item setting values
To end assignment item setup
DISP
Program setup To start program setup (programming)
(in basic display state)
FUNC
+
PROG
To move between program items and segment
Nos.
To start changing item setting values
(while setting value is blinking)
ENT
To end changing item setting values
(while setting value is blinking)
To change item setting values
(while setting value is blinking)