Azbil DCP31 - Programming map

8-5
Chapter 8. PROGRAM SETUP
(15) Press
FUNC
+
PROG
toincrementprogramNos,and
FUNC
+ 
todecrementprogramNos.
(16) Basicdisplaystateisreturnedto.

Programming map
Asshowninthefigurebelow,theprogrammingmapisarranged
inamatrixwiththesegmentNos.alignedalongthehorizontalaxis
andprogramsetupitemsarrangedalongtheverticalaxis.
Theareasurroundedbythickblacklinesindicatestheitemsthat
canbedesignatedbysegmentNo.andprogramsetupiteminthe
programsetupstate.
, : Movestotheleftorright(i.e.movessegments)
, : Movesupordown(i.e.movesprogramitems).
Theprogrammingmapbelowshowsanexamplewheresegments
No.1toNo.10havebeensetup.