Azbil DCP31 - Page 182

8-4
Chapter 8. PROGRAM SETUP

Description of mode transition states (see page 8-2.)
(1) Programsetupisentered.
(2) Setupitemonprogrammingmapismoved.
(3) Segmentonprogrammingmapismoved.
(4) EntryoftheNo.1setupisstarted.
(5) No.1settingvalueincremented/decremented,andblinking
digitismoved.
(6) EntryofNo.1setupiscompleted.
ENT
storesthevaluebeingenteredtomemory.
WithitemshavingaNo.2setup,entryoftheNo.2setupvalue
isstarted.WhentheitemdoesnothaveaNo.2setup,thesetup
displayisreturnedto.
When
FUNC
+
CLR
arepressedatanevent/timeeventitem,the
settingforthatsegmentiscleared.
When
FUNC
+
CLR
arepressedataG.Soakitem,thesettingfor
thatsegmentiscleared.
(7) Pressing
FUNC
+
CLR
forapatternitemcauses“
CLR.
”toblink
toconfirmclearingoftheprogramfromthatsegmentonwards.
However,notethat
FUNC
+
ENT
isdisabledforcurrentlyrun-
ningprograms.
(8) 
ENT
clearstheprogramfromthatsegmentonwards.
DISP
doesnotcleartheprogramandthesettingdisplayis
returnedto.
(9) No.2setupsettingvalueincremented/decremented,andblink-
ingdigitmoved.
(10) EntryofNo.2setupiscompleted.
ENT
storesthevaluebeingenteredtomemory.
When
FUNC
+
CLR
arepressedatanevent/timeeventitem,the
settingforthatsegmentiscleared.
(11) Entryofvaluescurrentlybeingenteredcompletedwithoutbe-
ingstoredtomemory.
(12) When
FUNC
+
ENT
arepressedatapatternitem,thedisplay
changestothesegmentinsert/deletescreen,and“
InS.
”is
blinks.
However,notethat
FUNC
+
ENT
isdisabledforcurrentlyrun-
ningprograms.
( 1 3 )  “
dEL.
”displayedblinkingby
,and“
InS.
”displayed
blinkingby
.
(14) If
ENT
ispressedatthe“
InS.
”display,asegmentisinserted.
If
ENT
ispressed,asegmentis“
dEL.
”.
If
DISP
ispressed,neitherofsegmentdeleteorinsertarecarried
out.