Azbil DCP31 - Setting up PV start items

8-15
Chapter 8. PROGRAM SETUP

Display
•“----”isdisplayedforthesettingvaluesinnon-setsegments.
TheG.Soaktimeoutfunctiondoesnotworkinnon-setsegments.
•Whensetupdata
C70
issetto1,G.Soaktime-outitemsonthe
programmingmapareskippedandnotdisplayed.

Setting up PV start items
(1) Inthesettingdisplaystate,movetothePVstartitemsonthe
programmingmap.
 (ThesettingsarecommontoallsegmentsasthePVstartitems
aresettingitemsprovidedforeachprogram.)
(2) Ifyoupress
ENT
,thelowerdisplaystartsblinkingtoindicate
startofentrytotheNo.1setup.
(3) Press
, , or tosettotheNo.1setupPVstart
setting.
 Settingrange: 0to1
0:PVstartdisabled
1:PVstartenabled
(4) Whenyoupress
ENT
,blinkingonthelowerdisplaystops.

Display
•ThesettingsarecommontoallsegmentsasthePVstartitemsare
settingitemsprovidedforeachprogram.
•Whensetupdata
C71
issetto1,PVstartitemsontheprogram-
mingmapareskippedandnotdisplayed.
G.Soak time -out setting value
Program No. Segment No.
Pattern
tendency
EV1 to EV3 and T1 to T5 all out
G. S. t O
PV start setting value
Program No. Segment No.
Pattern
tendency
EV1 to EV3 and T1 to T5 all out
p.S t a