Azbil DCP31 - Auxiliary Output

5-29
Chapter 5. FUNCTIONS

Auxiliary output

Auxiliary output 1
Whenauxiliaryoutput1or2aresupportedon0D,5Gor6Doutput
models,auxiliaryoutput1isprocessedasfollows:

Auxiliary output 2
Whenauxiliaryoutput2issupportedon0D,5Gor6Doutputmod-
els,auxiliaryoutput2isprocessedasfollows:
Whenauxiliaryoutput1issupportedon2G,3Dor5Koutputmod-
els,auxiliaryoutput2isprocessedasfollows:
Auxiliary output 1 type
Upper/lower limit scaling
Output 2
4 mA (0 mA)
Current output 4 to 20 mA (0 to 20 mA)
When READY mode is entered at auxiliary
output type SP and deviation
When auxiliary output type is NOP
When auxiliary output type is set to MFB on
non-2G output models
When auxiliary output type is set to MV by
programmer function on 5G output models
Setting: Setup data C46
Setting: Setup data C47/C48
Auxiliary output 2 type
Upper/lower limit scaling
Output 3
4 mA (0 mA)
Current output 4 to 20 mA (0 to 20 mA)
When READY mode is entered at auxiliary
output type SP and deviation
When auxiliary output type is NOP
When auxiliary output type is set to MFB on
non-2G output models
When auxiliary output type is set to MV by
programmer function on 5G output models
When auxiliary output type is set to MV by
3-position-proportional control on 3D
output models
Setting: Setup data C49
Setting: Setup data C50/C51