Azbil DCP31 - Setting up G.Soak (guarantee soak) items; Setting up G.Soak time-out items

8-14
Chapter 8. PROGRAM SETUP

Setting up G.Soak (guarantee soak) items
(1) Inthesettingdisplaystate,movetotheG.Soakitemoftheseg-
menttobesetupontheprogrammingmap.
(2) Ifyoupress
ENT
,thelowerdisplaystartsblinkingtoindicate
startofentrytotheNo.1setup.
(3) Press
, , or tosettotheG.Soakwidthsetting.
 Settingrange: 0to1000U
(4) Whenyoupress
ENT
,blinkingonthelowerdisplaystops.
 ( W h e n 
FUNC
+
CLR
arepressed,thelowerdisplayreturnsto
“----”andblinkingstops.)

Display
•“----”isdisplayedforthesettingvaluesinnon-setsegments.
TheG.Soakfunctiondoesnotworkinnon-setsegments.
•Whensetupdata
C70
issetto1,G.Soakitemsontheprogram-
mingmapareskippedandnotdisplayed.

Setting up G.Soak time-out items
(1) Inthesettingdisplaystate,movetotheG.Soaktime-outitemof
thesegmenttobesetupontheprogrammingmap.
(2) Ifyoupress
ENT
,thelowerdisplaystartsblinkingtoindicate
startofentrytotheNo.1setup.
(3) Press
, , or tosettotheG.Soaktime-out
widthsetting.
 Settingrange: 0:00to99:59(h:min/min:s)
0.0to599.9(0.1s)
 (Selecteitherofh:minormin:sasthetimeunitinsetupdata
C64
.“:”issubstitutedby“.”asitcannotbedisplayed.)
(4) Whenyoupress
ENT
,blinkingonthelowerdisplaystops.
 ( W h e n 
FUNC
+
CLR
arepressed,thelowerdisplayreturnsto
“----”andblinkingstops.)
G.Soak setting value
Program No. Segment No.
Pattern
tendency
EV1 to EV3 and T1 to T5 all out
G. S.