Azbil DCP31 - Functions Using Two or more Keys

2-8
Chapter 2. NAMES & FUNCTIONS OF PARTS

Functions using two or more keys
PROG
+
RUN/HOLD
 : Resetkeys
  Press
RUN/HOLD
with
PROG
helddowninthebasicdisplaystatetoresetthe
controller.
ThecontrollerenterstheREADYmodeintheRUN,HOLD,FASTor
ENDmodes.
ThecontrollercannotberesetintheREADYmodebykeyoperation.
PROG
+
DISP
 : Advancekeys
  Press
DISP
with
PROG
helddownintheprogramoperationmodeinthe
basicdisplaystatetoadvancetheprogram.
IntheRUN,HOLDorFASTmodes,theprogramadvancestothenext
segment.
ThecontrollercannotadvanceintheREADYmodebykeyoperation.
FUNC
+  : Fastkeys
  Press
with
FUNC
helddownintheprogramoperationmodeinthe
basicdisplaystatetofast-operatetheprogram.
ThecontrollerenterstheFASTmodefromtheRUNorHOLDmodes.
FUNC
+
PARA
 : Parametersetupkeys
  Press
PARA
with
FUNC
helddowninthebasicdisplaystatetomovetose-
lectionofthesettinggroup(majoritems)intheparametersetupstate.
FUNC
+
PROG
 : Programsetup(programming)keys
  Press
PROG
with
FUNC
helddownintheprogramoperationmodeinthe
basicdisplaystatetomovetotheprogramsetup(programming)state.
Press
PROG
with
FUNC
helddownintheprogramsetupstatetochange
theNo.oftheprogramtobesetupinascendingorder.
FUNC
+  : ProgramNo.changekeys
  Press
with
FUNC
helddownintheprogramsetupstatetochange
theNo.oftheprogramtobesetupindescendingorder.
FUNC
+
CLR
 : Programitemdeletekeys
  Press
CLR
with
FUNC
helddownduringentryofsettingsinthepro-
gramsetupstatetoclearthesetting.
FUNC
+
ENT
 : Segmentinsert/deletekeys
  Press
ENT
with
FUNC
helddownatSPortimeitemintheprogram
setupstatetomovetothesegmentinsert/deletescreen.
+
PROG
 :Programcopykeys
  Press
PROG
with helddownintheprogramoperationREADY
modeinthebasicdisplaystatetomovetotheprogramcopyscreen.