Azbil DCP31 User Manual

6-6
Chapter 6. OPERATION

Display in constant-value operation mode

DISP
functions
Output
Model No.
Display
0D, 5G, 6D Display 1
→
Display 2
→
Display 1 (repeated)
2G Display 1
→
Display 2
→
Display 3
→
Display 1 (repeated)
3D, 5K Display 1
→
Display 2
→
Display 4
→
Display 1 (repeated)

Display 1
ThedigittowhichSPvaluescanbeenteredblinksintheMANUAL
modewhencontrollerfunctionsareselected.

Display 2
ThedigittowhichSPvaluescanbeenteredblinksintheMANUAL
modewhenprogrammerfunctionsareselected.
PV
SP
PV
SP
Output state of events 1 to 3
PV
OUT
PV
Output value (%)
Output state of events 1 to 3

Azbil DCP31 Specifications

General

Type	Digital Indicating Controller
Control Method	PID control
Input Type	Thermocouple, RTD, DC voltage, DC current
Display	LED display
Communication	RS-485
Output Type	Relay, Voltage pulse, Current
Power Supply	100 to 240 VAC
Control Output	Relay contact, Voltage pulse, Current
Operating Temperature	-10 to 50°C