Azbil DCP31 - 5 - 5 Input Processing Functions

Inputprocessingiscarriedoutintheordershownbelow.
(resistance temperature detector)
(thermocouple)
Setting: Setup data C72
Input range type
Wiring resistance compensation
Analog input 1
A/D conversion
Cold junction compensation
Upper/lower limit value scaling
Upper/lower limit alarm
Square-root extraction
Temperature unit range
Linearization approximation
Digital lter
Bias
PV1
(DC current and voltage)
Setting: Setup data C07
Setting: Setup data C03
(thermocouple and resistance temperature detector)
Setting: Setup data C02
(DC current and voltage)
Setting: Setup data C04 to C0 6
Setting: Setup data C0 8
Table data T-A. 1 to T-B.B
Setting: Variable parameter FL
Setting: Variable parameter PBi
5-23
Chapter 5. FUNCTIONS
5 - 5 Input Processing Functions