7. Advanced
Image 7-82
2. Use ← and → to adapt the value of PixelsX
Tip: Use ↑ and ↓ to adapt the value of PixelsY
The image is distorted along the X axis. Notice the unaffected reg
ions.
Image 7-83
The adjustment is done in small steps. Adjusting for instance from 0 to 100 using the Adjust mode is not the
ideal method. The use of the Edit and Change mode is more appropriate.
How to adjust using the Edit and Change mode ?
Adjusting point (row =0 ; column =0) by 100 (pixels) along the x axis in the 2x2 mode
1. Press 2 times ENTER to go t
otheEdit Mode
96
R59770324 SIM 5W 22/12/2011
Downloaded From projector-manual.com Barco Manuals
To Next Page
Loading...
