7. Advanced
Image 7-222
5. Press → to Pull down the menu
6. Use ↑ or ↓ to select the desired pattern
7. Press ENTER
The active selection is indicated with a white bullet
7.10.5 Color Wheel Index
CAUTION: Changing these settings may seriously affect the performance of the projector.
What can be done?
This adjustment has to be done by qualified service personnel when a new color wheel is installed. The Color Wheel Index must be
adjusted until no more vertical lines are visi
ble in the horizontal color bar pattern.
How to set the Color Wheel Index?
1. Press the MENU key to activate the Menu bar.
2. Push the cursor key ← or → to highlight Installation in the menubar.
3. Push the ↓ keytopulldowntheInstallation menu.
4. Push the cursor key ↑ or ↓ to highlight Color Wheel Index and press ENTER to select.
172
R59770324 SIM 5W 22/12/2011
Downloaded From projector-manual.com Barco Manuals
To Next Page
Loading...
