Barco SIM 5W - Diagnose Leds

4. Installation
4.12 Diagnose Leds
Diagnose Leds
Diagnose Leds
L
E
D
1
L
E
D
2
L
E
D
3
Image 4-30
Diagnose Leds
Following diagnose leds can be found on top of the projector:
Led # / Led
Color
Green Orange
Red
Led 1
Cool down sequence:
flickers 120 seconds after
switching to standby
1
Upgrading
If blinking : upgrading lamp driver
Rescue program (Software error)
Led 2 Not used Not used Hardware error
If blinking : projector busy with passive
infitec (ON/OFF)
Led 3 IR acknowledgement Not used
Standby Status
1. Projector cannot be restarted during this period
38 R59770324 SIM 5W 22/12/2011
Downloaded From projector-manual.com Barco Manuals