Barco SIM 5W - Image Files; Introduction to Image Files

7. Advanced
4. Use ↑ or ↓ to select Passive Infitec
5. Press → to pull down the menu
6. Use ↓ or ↑ to select ON
Image 7-37
7. Press ENTER to select.
When passive Infitec
TM
is set to ON, the passive Infitec
TM
filter will be inserted into the light path of the projector.
7.5 Image files
Overview
• Introduction to Image files
• Load file
•Forcedfile load
• Auto Image
•Editfile
• Save as (create a custom file)
• Rename file
• Copy
• Delete
7.5.1 Introduction to Image files
Image files
An image file contains the main characteristics of a source (number of active lines,...). The projector’s memory contains a list of files
corresponding to the most common sources : standard files.
When a new source corresponds to one of these files, a custom file is created. The custom file is automatically saved if a setting is
altered (contrast, ...). The Sav e as... function allows to create and save a custom file.
The active filecanalwaysbeeditedinordertofit exactly the source specifications.
AutoImage creates automatically the best suited image file (custom file) for a new source. AutoImage is used
when :
- a new source is detected: AutoImage creates a new custom file which can always be edited if necessary.
- the AutoImage is launched via the button on the RCU, the projector’s OSD or from the desktop’s OSD
File notation
The notation of the image file happens as follows :
/Standard/SXGA+@60.xml
Type of file : standard or custom
Resolution
Vertical freq
file extension = xml
Image 7-38
72 R59770324 SIM 5W 22/12/2011
Downloaded From projector-manual.com Barco Manuals