7. Advanced
100
20
40
60
80
200 400 600 800 1000
Relative Light Output (%)
Runtime (hrs)
Constant Light Output
working area
Image 7-116
What is Time of Day?
It is possible to create night, dusk and dawn sceneries by setting the Time of Day to a different value. This activates both ECR
dimmers in the projector to reduce the light output of the projector.
By default, this projector is delivered without the Night Vision option. This means that Time of Day is not
available. Night Vision is an option that can be ordered with the projector.
7.7.3.2 CLO mode
HowtoswitchON/OFFtheCLO?
1. Press MENU to activate the Tool bar
2. Press → to select the Lamps item
3. Press ↓ to Pull down the Lamps menu
4. Use ↑ or ↓ to select CLO
5. Press → to pull down the CLO menu
6. Use ↑ or ↓ to select Mode
7. Press → to pull down the M ode menu
8. Use ↑ or ↓ to select ON or OFF
Image 7-117
9. Press ENTER
A bullet shows the active setting
114
R59770324 SIM 5W 22/12/2011
Downloaded From projector-manual.com Barco Manuals
To Next Page
Loading...
