3. Installation guidelines
• Air intake vent
Cold Air In Cold Air In
Image 3-4
Air intake vent
• Exhaust vent
Hot Air Out
Image 3-5
CAUTION: To protect the projector from overheating do not cover or block the air intake and/or exhaust vent.
CAUTION: Do not place flammable objects near the Exhaust Vent.
CAUTION: Do not touch the Exhaust Vent Grill when the projector is switched on, this part will become hot
during operation.
CAUTION: In a multi channel setup, make sure that the hot air outlet from the one projector is not sucked in
as fresh air by the other projector.
R59770324 SIM 5W 22/12/2011 13
Downloaded From projector-manual.com Barco Manuals
To Next Page
Loading...
