Barco SIM 5W - Change Password

5. Setup
5. Press → to pull down the menu
6. Use ↓ or ↑ to enable/disable the automatic startup
Image 5-12
7. Press ENTER
5.7.1.3 Change password
What can be done ?
The password used to access the advanced (More ...) items can be reprogrammed.
How to change the password ?
1. Press MENU to activate the Tool bar
2. Press → to select the Installation item
3. Press ↓ to Pull down the Installation menu
4. Use ↑ or ↓ to select Change password...
Image 5-13
5. Press ENTER
46
R59770324 SIM 5W 22/12/2011
Downloaded From projector-manual.com Barco Manuals