Barco SIM 5W - Image; Image Settings; Setting the Brightness; Setting the Contrast

7. Advanced
7.4 Image
Overview
• Image settings
• Gain control on Video
• Aspect ratio
• Input balance (RGB signals only)
• Passive Infitec
TM
(Optional)
7.4.1 Image settings
7.4.1.1 Setting the Contrast
Contrast adjustments
Adjust the contrast to “brighten” the white parts of the image.
It is recommended to adjust the brightness before adjusting the contrast.
How to change the Contrast
1. Press MENU to activate the Tool bar
2. Press → to select the Image item
3. Press ↓ to Pull down the Image menu
4. Use ↑ or ↓ to select settings
5. Press → to pull down the menu
6. Use ↑ or ↓ to select Co ntrast
7. Press ENTER
On the screen appears now a slider box
Image 7-9
8. Use ←or → , the numeric keys on the remote, or the keypad to change the contrast
7.4.1.2 Setting the Brightness
Brightness adjustment
Adjusting the brightness will affect the dark areas of the image. Increase the brightness to “lighten” up the parts that are too dark.
How to change the Brightness
1. Press MENU to activate the Tool bar
2. Press → to select the Image item
3. Press ↓ to Pull down the Image menu
4. Use ↑ or ↓ to select settings
5. Press → to pull down the menu
6. Use ↑ or ↓ to select Brightness
7. Press ENTER
R59770324 SIM 5W 22/12/2011
59
Downloaded From projector-manual.com Barco Manuals