7. Advanced
A dialog box is displayed
Image 7-121
10.Use ←or →, the numeric keys on the remote, or the keypad to change the target value.
Note: Range: 200 to 3000 A.U.
7.7.3.3.3 Time of Day target
This feature is only available if the projector has the Night Vision option: the menu item will be greyed out if
this option is not present.
How to set the target for Time of Day?
1. Press MENU to activate the Tool bar
2. Press → to select the Lamps item
3. Press ↓ to pull down the Lam ps menu
4. Use ↑ or ↓ to select CLO
5. Press → to pull down the CLO menu
6. Use ↑ or ↓ to select Targ e ts
7. Press → to pull down the Targets menu
8. Use ↑ or ↓ to select Time of Day...
Image 7-122
9. Press ENTER
A dialog box is displayed
Image 7-123
10.Use ←or →, the numeric keys on the remote, or the keypad to change the target value.
Note: Range: 0.0 to 100.0 (i.e. %)
R59770324 SIM 5W 22/12/2011
117
Downloaded From projector-manual.com Barco Manuals
To Next Page
Loading...
