Barco SIM 5W - History; Reset Lamp Runtime

7. Advanced
9. Use the cursor keys ← or → , the numeric keys on the RCU, or the local keypad, to set the ECR limit to the desired value.
Note: Range: 0.0 to 100.0 (i.e. %)
10.Press ENTER to activate the new ECR limit settings.
11. Press BACK to return to the Lamps menu.
7.7.5 History
How to view the lamp history ?
1. Press MENU to activate the Tool bar
2. Press → to select the Lamps item
3. Press ↓ to Pull down the Lamps menu
4. Use ↑ or ↓ to select History
Image 7-136
5. Press ENTER
A text box is displayed
Image 7-137
7.7.6 Reset lamp runtime
When to reset the lamp runtime?
The lamp runtime should only be reset when placing a new lamp.
WARNING: Lamp runtime reset as well as the lamp replacement can only be done by a Barco authorized
technician.
Necessary tools
No tools.
124
R59770324 SIM 5W 22/12/2011
Downloaded From projector-manual.com Barco Manuals