Barco SIM 5W - Geometry Reset; Reset All Levels

7. Advanced
How to adjust the geometry Sharpness ?
1. Start up the Geometry Edit menu
2. Push the cursor key ↑ or ↓ to highlight Sharpness... and press ENTER to select.
Image 7-100
The Sha rpness dialog box will be displayed.
Image 7-101
3. Use the cursor key ← or → , the numeric keys on the RCU, or the loca
l keypad, to edit and change the value of the Sharpness.
Note: The Sharpness can be set from –8 to +8.
4. Press BACK to return to the G eom etry Edit menu.
7.6.6.9 Geometry Reset
Overview
• Reset all levels
• Restore to a level
7.6.6.9.1 Reset all levels
How to reset all levels?
1. Start the Geometry Edit menu
2. Push ↓ or ↑ to select Reset
3. Push the → key to pull down the menu.
4. Push ↓ or ↑ to highlight R eset a ll levels...
.
R59770324 SIM 5W 22/12/2011
105
Downloaded From projector-manual.com Barco Manuals