7. Advanced
4. Use the cursor key ↑ and ↓ to select the desired geometry file and press ENTER to select.
A message will be displayed.
Image 7-111
5. Press ENTER to confirm.
The selected file is deleted and removed from the list.
6. Press BACK to return to the G eom etry Edit menu.
7.7 Lamps
Overview
• Lamp runtimes
• Lamp mode
•CLO
• Dimmer control
•History
• Reset lamp runtime
• Clear lamp error
• Lamp runtime warning
7.7.1 Lamp runtimes
How to display the lamp runtimes ?
1. Press MENU to activate the Toolbar
2. Press → to select the Lamp item
3. Press ↓ to Pull down the Lamp menu
4. Use ↑ or ↓ to select Runtimes
Image 7-112
5. Press ENTER
R59770324 SIM 5W 22/12/2011
111
Downloaded From projector-manual.com Barco Manuals
To Next Page