Barco SIM 5W - Press the Double Right Arrow Key until the Dimmer Appears on the Top Edge of the Screen; Use the Fine Adjustment Buttons to Move the Dimmer Back until It Is no Longer Visible

7. Advanced
Image 7-237
Press the double right arrow key until the dimmer appears on the top edge of the screen.
4. Use the fine adjustment buttons to move the dimmer back until it is just no longer visible on the full white pattern.
Image 7-238
Use the fine adjustment buttons to move
the dimmer back until it is no longer visible
This is the correct reference position for Dimmer 1.
5. Use the arrow keys on the RCU to highlight the double left arrow button for Dimmer 2.
Image 7-239
6. Press the double right arrow key until the dimmer appears on the bottom edge of the screen.
R59770324 SIM 5W 22/12/2011
179
Downloaded From projector-manual.com Barco Manuals