7. Advanced
The Dimmer Reference Positions dialog box will be displayed on top of a full white pattern.
Image 7-234
How to perform the CCD calibration?
1. Use the arrow keys on the RCU to highlight the Ref. Search button and press ENTER.
Image 7-235
The dimmers are set to the reference positions.
2. Use the arrow keys on the RCU to highlight the double right arrow button for Dimmer 1.
Image 7-236
3. Press the double right arr
ow key until the dimmer appears on the top edge of the screen.
178
R59770324 SIM 5W 22/12/2011
Downloaded From projector-manual.com Barco Manuals
To Next Page
Loading...
