Barco SIM 5W - DVI HDCP Input Connection; DVI out Connection

4. Installation
Projector
DVI-D COMPUTER
DVI-D HDCP COMPUTER
Image 4-19
DVI HDCP input connection
How to connect a DVI out?
1. Connect the DVI cable to the DVI OUT connector of the projector.
Projector
DVI-D COMPUTER
DVI-D HDCP COMPUTER
Image 4-20
DVI out connection
4.9.8 PC
PC connection
A RGB signal can be connected through a DB-15 connector (VGA connector).
How to connect a PC signal ?
1. Connect the VGA connector to the projector’sDB—15 input
30
R59770324 SIM 5W 22/12/2011
Downloaded From projector-manual.com Barco Manuals