7. Advanced
Image 7-223
Tip: Press the LOGO key to display a full w hite pattern.
The Color Wheel Index slider bar will be displayed on a specific pattern.
Image 7-224
5. Use the cursor key ← or → , the numeric keys on the RCU, or the local keypad, to adjust the Color Wheel Index, confirm with
ENTER.
6. Press BACK to return to the Installation menu.
7.11 Service
Overview
• Diagnostics
• Board identification
• Option key
•Dimming
• Calibration of CLO sensor
• Operation options
• Version table
• Restore factory settings
• Air pressure
7.11.1 Diagnostics
What can be done ?
The projector bus allows the diagnostic of different hardware components divided in two main groups.
•I
2
C diagnostics : a number of internal electronic boards can be diagnosed and a graphical interface shows whether an error is
• Lamps and power supply : lamp temperature and power related failures are logged and can be checked at any time.
How to display the I
2
C diagnostics menu ?
1. Press MENU to activate the Tool bar
2. Press → to select the Service item
R59770324 SIM 5W 22/12/2011
173
Downloaded From projector-manual.com Barco Manuals
To Next Page
Loading...
