7. Advanced
3. Press ↓ to Pull down the menu
4. Use ↑ or ↓ to select Diagnostics
5. Press → to pull down the menu
6. Use ↑ or ↓ to select I
2
C and press ENTER
Image 7-225
A text box is displayed
Image 7-226
How to display the Lamps and power supply diagnostic menu ?
1. Press MENU to activate the Tool bar
2. Press → to select the Service item
3. Press ↓ to Pull down the menu
4. Use ↑ or ↓ to select Diagnostics
5. Press → to pull down the menu
6. Use ↑ or ↓ to select Lamps and power supply and press ENTER
Image 7-227
174 R59770324 SIM 5W 22/12/2011
Downloaded From projector-manual.com Barco Manuals
To Next Page
Loading...
