Barco SIM 5W - The Projector Color Gamut Is Defined by the Triangle Formed by the X, y Coordinates of Red Green and Blue; The Color Gamut of each Projector will Differ; Common Color Gamut

7. Advanced
A projector can only reproduce a certain color gamut within this diagram. This color gamut is defined by the triangle formed by the
x, y coordinates of Red Green and Blue. These parameters are used by the DynaColor™ adjustment in the projector.
Image 7-155
The projector color gamut is defined by the triangle formed by the x, y coordinates of Red Green and Blue
Due to the tolerance on optical components the x, y values of this color gamut of each projector will differ.
Image 7-156
The color gamut of each projector will differ
When working with a multichannel setup, these color differences between different projectors can be smooth out by matching the
color gamuts of the different projectors to a Common Color Gamut.
Image 7-157
Common Color Gamut
The Common Color Gamut
In a basic setup with 2 projectors, the perimeter of the Common Color Gamut is described by the 6 points of intersection of the 2
separate color gamuts.
134
R59770324 SIM 5W 22/12/2011
Downloaded From projector-manual.com Barco Manuals