Barco SIM 5W - Display Setup; Full Screen Synchronous Representation; Textbox

7. Advanced
7.9 Display Setup
Overview
• Textbox
• Full screen synchronous representation
• Menu bar position
• Status bar position
• Slider box position
• DynaColor
• Color temperature
• Brilliant Color
TM
Mode
• Soft edge
• AutoImage Setup
• Sync variance limit
7.9.1 Textbox
What can be done ?
The Text box function allows to choose whether the different text boxes are displayed or not.
How to enable/disable the Textbox ?
1. Press MENU to activate the Tool bar
2. Press → to select the Display setup item
3. Press ↓ to Pull down the Display setup menu
4. Use ↑ or ↓ to select Textbox
5. Press → to pull down the menu
6. Use ↓ or ↑ to enable (ON) or disable (OFF) the textbox
Image 7-149
7. Press ENTER
A white bullet shows the active setting
7.9.2 Full screen synchronous representation
What can be done ?
In the full screen mode, the projector will always try to lock on the input source. Some monitors (connected on the DVI output of the
projector) may fail to synchronize on this type of signal (number of total lines may vary in such a signal).
The Full-screen synchronous representation function in the Display s etup menu allows to disable this mode.
130
R59770324 SIM 5W 22/12/2011
Downloaded From projector-manual.com Barco Manuals