Barco SIM 5W - Restore Factory Settings; Version Table

7. Advanced
2. Press → to select the Service item
3. Press ↓ to Pull down the Service menu
4. Use ↑ or ↓ to select O peration options
5. Press → to pull down the Operation Options menu
6. Use ↑ of ↓ to select Warning Messag e s
7. Press → to pull down the War ning Mes sages menu
8. Use ↑ or ↓ to select On or Off
9. Press ENTER to confirm
Image 7-246
A white bullet shows the active setting
7.11.7 Version table
How to display the version table ?
1. Press MENU to activate the Tool bar
2. Press → to select the Service item
3. Press ↓ to Pull down the menu
4. Use ↓ and ↑ to select Version table...
Image 7-247
A dialog box is displayed showing the software versions of the different components
7.11.8 Restore factory settings
What can be done ?
The factory settings can be restored for :
• Dynacolor
• Color Wheel index
• Brillant Color
184
R59770324 SIM 5W 22/12/2011
Downloaded From projector-manual.com Barco Manuals