7. Advanced
Image 7-48
UsePictureBox can be disabled (0) or enabled (1). By default, it is disabled which means that only few timings can be changed. In
case of a DVI source this is not a problem.
In very specific situations however (e.g. iBlend), more changes to the timings may be needed, such as the
setting of the S tart pixels,
Active pixels, Start lines, Active lin es . In that case, hit Enter and change the slider to position 1, thus enabling more settings in the
Edit file menu.
Image 7-49
In the current software versions (1.22 for (Galaxy)NH-12, 1.23 for (Galaxy) NW-12, 1.02 for SIM 5W), changing
the UsePictureBox settings also inverts the interlacing!
7.5.6 Save as (create a custom file)
Creating a custom file
When the loaded file is a standard file there is a possibility of saving it as a custom file (= creating a custom file) , this is done with
the save as function. The saved file will always be a custom file (saved in the custom directory)
For sources that are often used, a custom file should be created. This custom file will then be loaded auto-
matically and will prevent the AutoImage from being launched.
How to save a file ?
1. Press MENU to activate the Tool bar
2. Press → to select the Image files item
3. Press ↓ to Pull down the Image files menu
4. Use ↑ or ↓ to select Save as...
Image 7-50
5. Press ENTER
A dialog box is displayed
Use ←or →, ↓ or ↑ the numeric keys on the remote, or the keypad to edit and change the file name, confirm with ENTER.
78
R59770324 SIM 5W 22/12/2011
Downloaded From projector-manual.com Barco Manuals
To Next Page
Loading...
